Open factory planner →
SATISFACTORY · SATISGRID FIELD NOTES

Satisfactory belts, splitters, mergers and pipes

Every connection needs enough capacity for the material passing through it. Check the shared sections of a route as carefully as the individual machine feeds.

Add the rates on shared belts

If three machines each need 20 items per minute, their shared feed must supply 60 per minute before the first branch. Once a branch removes 20, the next segment carries the remaining 40. A merger does the reverse: the outgoing belt needs room for the sum of the incoming flows.

Shared feed
60 /min
→Three consumers
20 /min each

The slowest segment limits the route. Check short connectors and conveyor lifts as well as the long main belt when upgrading a line.

Choose a distribution method

A manifold supplies a row of machines along one shared belt. Early machines fill first during startup, so the last machines may take time to reach steady production. An equal distribution tree divides the feed into branches before the machines. Use the in-app Connection guides to choose the method and inspect the actual splitter and merger ports.

A normal merger combines inputs; it should not be treated as a configurable priority control. Where the bundled game version provides a Priority Merger, use its documented settings to favour returned materials. A Smart Splitter’s overflow option routes excess output; it serves a different purpose from input priority.

Read pipe rates in cubic metres per minute

Liquids and gases use pipe connections rather than belts. Compare the required flow with the selected pipe tier and inspect every shared pipe segment. A pipe that is large enough for one machine may not carry a whole row’s demand.

Pumps and vertical routes

Check the height changes and pump schedule before building a rising liquid supply. Pumps address head lift; adding a pump does not raise the pipe’s rated throughput. Placement, flow direction and the available head lift all matter. Gases and liquids can behave differently, so use the guide for the material you are transporting.

Give recycled liquid somewhere to go

A returned-liquid loop needs its recycle stream consumed consistently. Extra fresh supply can fill the network and block the machine returning liquid. The Connection guides include a recycled-liquid priority arrangement, with its height relationships and startup conditions, and the alternative of giving returned water its own consumer. Follow those diagrams instead of assuming any tee junction provides reliable priority.

Test the whole line

Inspect warnings, fill the network deliberately and check sustained machine efficiency in the game. Pipe transients and backflow are not fully represented by a steady-state rate calculation. If a line stops, check input availability, full outputs, fluid levels and the smallest transport segment before adding more machines.

Next: machine layouts and placement checks, or the full nuclear production chain.

Browse all Satisfactory guides →

Written for SatisGrid’s bundled Satisfactory 1.2 catalog, checked 16 November 2026. Recipe data: Satisfactory Calculator stable catalog. Use the in-app guides for source links and placement conditions.

Open the factory planner →