Open factory planner →
SATISFACTORY · SATISGRID FIELD NOTES

Plan uranium, plutonium and Ficsonium power together

A Ficsonium power setup is a chain of fuel production, reactors and waste processing. Count every reactor that supplies the chain, then subtract the factory’s own consumption to understand usable power.

A 35-reactor example at 250%

For the standard-recipe chain with no Somersloops, SatisGrid’s five-Ficsonium-reactor plan at 250% includes 20 uranium reactors and 10 plutonium reactors, also at 250%. Every reactor in this example produces 6,250 MW.

FuelReactorsClockGross power
Uranium Fuel Rod20250%125,000 MW
Plutonium Fuel Rod10250%62,500 MW
Ficsonium Fuel Rod5250%31,250 MW
Total35218,750 MW

This is gross generation. Fuel production, extraction and waste processing consume electricity. Recipe choices, Somersloops, imported materials and generator clocks can change the upstream chain, so this ratio is an example rather than a rule for every nuclear build.

Plan in three connected stages

  1. Uranium: make Uranium Fuel Rods and supply uranium reactors with fuel and water. Route their waste into the next stage.
  2. Plutonium: process Uranium Waste into Plutonium Fuel Rods, then burn the rods when the plan needs Plutonium Waste for Ficsonium.
  3. Ficsonium: supply the waste-processing and quantum production recipes, then feed the final reactors.

Open Power generation by fuel to see the upstream reactors. The final target generator count alone does not describe the whole power station.

Check water and waste before starting

Use the stage layouts to identify each liquid inlet, solid inlet and waste outlet. Keep the required reactor water supply separate from assumptions about power production: a reactor with missing cooling water cannot deliver its planned output.

Read the pipe and routing checks, including pump positions and any unresolved warnings. Static layouts cannot simulate every transient fluid condition. Fill the network, bring the stages online deliberately, and confirm sustained flow in the game before depending on the full output.

Keep a build record

Save the factory and use its build checklist as you complete each stage. Download a backup before major changes to recipes or clock speeds. If you choose a different waste strategy, calculate that complete chain again rather than reusing the figures from this example.

Written for SatisGrid’s bundled Satisfactory 1.2 catalog, checked 16 November 2026. Recipe data: Satisfactory Calculator stable catalog. Use the in-app guides for source links and placement conditions.

Open the factory planner →